chat_icon

Epoxy Grout

Unmatched Durability, Unwavering Beauty.

Epoxy grout - Epoxy based on two component epoxy resin based tinable grout specifically designed for use in application of ceramic tiles , vitrified tiles and stone joints where a hygienic and sterile condition is expected.

Colour Shades

 color shade available
  • Grouting floors and walls in the food industry (dairies,breweries ,food plants,shops etc. Where hygienen is required.)
  • Grouting ceramic tiles on laboratory benches ,kitchen work surfaces,bathroom, washroom ,shower areas etc.
  • Grouting of swimming pools ,industrial,floors and walls where me mechanical and chemical attack resistance is required.
  • 2 component epoxy based,easy to mix joint filler available in 10 brilliant color shades.
  • Impervious ensuring excellent waterproofingin wet areas.
  • Excellent adhesion-sustainable and durable up to the life of the tile.
  • Ideal for areas where hygiene maintenance is critical like Labrotaries ,Breweries,Clinics and Bathroom.
  • Non-toxic and Chemical resitant.
Application Process
  • SURFACE PREPARATION: Make sure tiles are firmly set ,and adhesive or mortar is completely dry for 24 hour.Remove all spacers ,pegs ,ropes and string clean joints by removing free loose dirt particles.To ensure desired results , a mockup installation is required before the actual installation.
  • PREPARING MIX:Always mix comoplete units. parts A(base) and B(hardner) are packaged to the exact quantity ratio for proper mixing .Partial mixing will result improper / no curing grout .To get the desiered colour of grout take the required quantity of colour in part A ,machine (color quantity to be adjusted based on desired shade ).Mix the color with base property & ensure homogeneity. In a clean container mix all of part A (Tinted Materials) and all of part B. Use a slow-speed stirrer for mixing to get a homogeneous, Consistent color. A small quantity , can be mixed manually at the site.
  • APPLICATION: Press the grout firmly by using a hard rubber squeeze ,into joints ensuring that the joints are completely filled. Remove the excess grout material from joints and surface by moving the squeeze diagonally to the grout lines.
  • CLEANING:Clean off the surplus grout from tile joints and surface after 20-25 minutes.Intially use rough textured sponge dampened with clean water.Use the damp sponge in a circular motion and keep it relative to the tile surface to achieve the flush joint. After completion of work clean the grout haze from the tile with clean water or soap solution